Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #22

Editado por David Lyke

Edicion aprobada por Jeff Suovanen

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the logic board from the outer case, minding any cables that may get caught.
[* icon_note] When reinstalling the logic board, plug in a thunder port cablethunderbolt cable and a USB cable into the outer USB port closest to the headphone/microphone ports before tightening the logic board screws to ensure proper alignment.
[* icon_note] When reinstalling the logic board, plug in a thunder port cablethunderbolt cable and a USB cable into the outer USB port closest to the headphone/microphone ports before tightening the logic board screws to ensure proper alignment.