Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #4

Editado por mikeharms

Edicion rechazada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use the flat end of a spudger to pry all three AirPort antenna connectors up from their sockets on the AirPort board.
[* icon_reminder] During reinstallation, connect the cable withThe cables have either no stripes to the socket marked CH0, the cable withstripes, one stripe or two stripes. Write down which striped cable goes to CH1, andwhich socket. During reinstallation, reconnect the cable with two stripescables to CH2the same original channels.
[* icon_reminder] During reinstallation, connect the cable withThe cables have either no stripes to the socket marked CH0, the cable withstripes, one stripe or two stripes. Write down which striped cable goes to CH1, andwhich socket. During reinstallation, reconnect the cable with two stripescables to CH2the same original channels.