Saltar al contenido principal

Cambios al paso #2

Editado por Jeff G

Edicion aprobada por Chandler Skinner

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Next, remove the three .15 inch screws on the underside of the camera.
-[* icon_note] Make sure you remember where each screw came from. This will help tremendously when re-assembling the camera.
+[* red] While being careful to remember the original location of each screw, remove the three 0.15 inch screws on the underside of the camera.
+[* icon_note] Each of the screws is slightly different, so it is important that you note the original location of each screw.