Saltar al contenido principal

Cambios al paso #4

Editado por Dieter

Edicion rechazada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the following 3 screws:
[* red] Two 1.51.4 mm Phillips #00 screws, one on either side of the dock connector.
[* orange] One 2.4 mm Phillips #00 screw near the ribbon cable labeled "4." This one has a wider head with a diameter of 2.4mm
[* red] Two 1.51.4 mm Phillips #00 screws, one on either side of the dock connector.
[* orange] One 2.4 mm Phillips #00 screw near the ribbon cable labeled "4." This one has a wider head with a diameter of 2.4mm