Saltar al contenido principal

Cambios a Paso #14

Editado por Alberto

Edicion aprobada por Evan Noronha

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector.
[* icon_caution] There is a small golden grounding tab on the logic board adjacent to the 'Do not remove' sticker. Be ''very'' careful this does not to snag the tiny grounding clip on the side of the case when prying up the logic board; it breaks easily! If you have signal problems after removing the logic board, check this ground tab.
[* icon_caution] There is a small golden grounding tab on the logic board adjacent to the 'Do not remove' sticker. Be ''very'' careful this does not to snag the tiny grounding clip on the side of the case when prying up the logic board; it breaks easily! If you have signal problems after removing the logic board, check this ground tab.
[* icon_note] If the board won't lift up, double check to make sure all 8 screws securing the logic board have been removed.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Eliminado