Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #13

Editado por ctjuggler

Edicion rechazada por David Hodson

Antes
Después
Sin cambios

Líneas de Paso

[* black] There is a small golden grounding tab on logic board adjacent to the 'do not remove sticker'. Use a small slot screw driver or something similar to unhook the end of the tab from the case.
[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector.
[* icon_caution] There is a small golden grounding tab on logic board adjacent to the 'do not remove sticker'. BeBe VERY careful thisthe grounding tab does not snag on the side of the case when prying up the logic board; it breaks easily. If you have signal problems after removing the logic board, check this ground tab.
[* icon_caution] There is a small golden grounding tab on logic board adjacent to the 'do not remove sticker'. BeBe VERY careful thisthe grounding tab does not snag on the side of the case when prying up the logic board; it breaks easily. If you have signal problems after removing the logic board, check this ground tab.
[* icon_note] If the board won't lift up, double check to make sure all the screws securing the logic board have been removed.