Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #13

Editado por David Mitchell

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector. There is a tiny, gold grounding strap at the case, an inch below the spudger in the photo. It is soldered to the logic board. I cut it at the metal rim and will report later if I killed the phone.
[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector. There is a tiny, gold grounding strap at the case, an inch below the spudger in the photo. It is soldered to the logic board. I cut it at the metal rim and will report later if I killed the phone.
[* icon_note] If the board won't lift up, double check to make sure all the screws securing the logic board have been removed.