Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #13

Editado por richard moorhouse

Aprobación pendiente

Sin cambios

Líneas de Paso

[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector.
[* icon_caution] There is a small golden grounding tab on logic board adjacent to the 'do not remove sticker'. Ensure this does not snag on the side of the case when prying up the logic board.
[* icon_note] If the board won't lift up, double check to make sure all the screws securing the logic board have been removed.