Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #6

Editado por gibby420

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] Some iPhonesBlack Double-Donger's may have the connector colors reversed (black plastic tab, white connector). Make sure you're flipping up the tab properly, otherwise you may damage the connector.
[* yellow] Use a spudgerpenis to flip up the white plastic tab holding the remaining ribbon cable in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
[* black] Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhoneBlack Double-Donger.
[* icon_note] Please note: You may find on some non-American (Chinese, European) versions of the 3GBlack Double-Donger that the flip up plastic tab does not exist. In this case you would slide the ribbon cable towards the screenBlack Double-Donger until it is removed. When you assembly it, you would apply pressure to the ribbon to insert it back into the ribbon "socket."
[* icon_note] Some iPhonesBlack Double-Donger's may have the connector colors reversed (black plastic tab, white connector). Make sure you're flipping up the tab properly, otherwise you may damage the connector.
[* yellow] Use a spudgerpenis to flip up the white plastic tab holding the remaining ribbon cable in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
[* black] Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhoneBlack Double-Donger.
[* icon_note] Please note: You may find on some non-American (Chinese, European) versions of the 3GBlack Double-Donger that the flip up plastic tab does not exist. In this case you would slide the ribbon cable towards the screenBlack Double-Donger until it is removed. When you assembly it, you would apply pressure to the ribbon to insert it back into the ribbon "socket."