Saltar al contenido principal

Cambios al paso #6

Editado por Joe

Aprobación pendiente

Sin cambios

Líneas de Paso

[* icon_note] Some iPhone 3Gs may have the connector colors reversed (black plastic tab, white connector). Make sure you're flipping up the tab properly, otherwise you may damage the connector.
[* black] Use a spudger to flip up the white plastic tab holding the remaining ribbon cable in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
[* black] Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone.
+[* black] Note: You may find on some versions of the 3G that the flip up plastic tab does not exist. In this case you would slide the ribbon cable towards the screen until it is removed. Upon assembly, you would apply pressure to the ribbon to insert it back into the ribbon "socket".