Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #4

Editado por shrmn

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1."1". (Cable 1 is for the display)
[* black] Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1."1". (Cable 1 is for the display)
[* icon_caution] Be careful to insert the spudger from the left, as shown in the picture. If you try to pry up the ribbon from the right, you could damage the ribbon connector and need to replace the display!
[* icon_note] All connectors except the ribbon connector mentioned in step 6 release upwards.