Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #2

Editado por Eric Essen —

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.
[* icon_caution] Be very careful when opening the iPhone so that the cables under the display are not severed.
[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
[* icon_note] If you don't have athe display assembly is to damaged to allow the suction cup, you may be ablecup to use some wide scotchadhere, tape with a strong adhesive such as duct tape or something similar without too much gluemaybe used.
[* icon_note] If you don't have athe display assembly is to damaged to allow the suction cup, you may be ablecup to use some wide scotchadhere, tape with a strong adhesive such as duct tape or something similar without too much gluemaybe used.