Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por jqadamziz2

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
[* black] Insert a metal spudger into the seam between the silver front bezel and the black
assembly.Be very careful when opening, #4 cable may be stuck to back of display assembly on the edge closest to the home button. Gently pry the display assemblyand will rip in two if you open it up from its bezelto far to fast.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
[* black] Insert a metal spudger into the seam between the silver front bezel and the black
assembly.Be very careful when opening, #4 cable may be stuck to back of display assembly on the edge closest to the home button. Gently pry the display assemblyand will rip in two if you open it up from its bezelto far to fast.

Imagen 1

Versión Antigua

Nueva Versión