Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios a este Paso

Editado por David Mitchell

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] On reassembly, the ribbon cable removed in step 6 can present problems. Tapecan be difficult. Here is a solution that worked.
[* black] Tape
the other cables temporarily our of the way. Make
[* black] Make
a carefulgentle right-angle bend in the ribbon cable close to the connectors. Have
[* black] Have
a friend hold the display at a right angle to the logic case, with a gap between them. Use
[* black] Use
a pair of toothpicks to maneuver the ribbon cable into position and then push it (GENTLY!) in place with a toothpick, from that gap. It doesn't go all the way in. Toothpicks are softer than metal, and easier on the cable.
[* black] On reassembly, the ribbon cable removed in step 6 can present problems. Tapecan be difficult. Here is a solution that worked.
[* black] Tape
the other cables temporarily our of the way. Make
[* black] Make
a carefulgentle right-angle bend in the ribbon cable close to the connectors. Have
[* black] Have
a friend hold the display at a right angle to the logic case, with a gap between them. Use
[* black] Use
a pair of toothpicks to maneuver the ribbon cable into position and then push it (GENTLY!) in place with a toothpick, from that gap. It doesn't go all the way in. Toothpicks are softer than metal, and easier on the cable.