Saltar al contenido principal

Cambios al paso #2

Editado por David Higgins

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.
[* icon_caution] Be very careful when opening the iPhone so that the cables under the display are not severed.
[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
[* black] If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as ductthick, clear packing tape maybe used.
[* black] If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as ductthick, clear packing tape maybe used.