Cambios al paso #1
Editado por Nick Mathes —
Edicion aprobada por Nick Mathes
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Locate the clip that binds the two halves of the outer casing on the rear edge of the battery shaft. * |
|---|---|
| + | [* black] Locate the clip that binds the two halves of the outer casing on the rear edge of the battery shaft. *Use the angled tweezers to remove the clip. |
| [* black] Place the tweezers in the groove on the inside of the clip. Use your other hand to firmly brace the drill and pull downward until the clip comes loose. | |
| [* icon_caution] The clip is firmly placed, so this will take some effort. Take care not to pull so hard that you put yourself or others at risk of injury. If a portion of the clip becomes exposed, you can use the pliers to remove it completely. | |
| [* black] After successfully removing the clip, set it to the side in a safe place. |