Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Kelsea Weber

Edicion aprobada por Kelsea Weber

Antes
Después
Sin cambios

Líneas de Paso

[* black] The screen is now free except forLift the connector that goes topiece of tape covering the motherboarddisplay connector.
[* black] TheUnlock the ZIF connector is attatched by using a very sticky sticker onspudger to flip up the back (the one with the qr codeblack tab on it), however once that sticker comes uptop of the connector pops off andconnector.
[* black] Pull
the screen is freeribbon cable out with tweezers.
[* black] ConnectRemove the new screen to the connector. I would test the screen to see if it works before I put it back together, but if you trust that it'll work, continue to reassemblescreen.
[* black] The screen is now free except forLift the connector that goes topiece of tape covering the motherboarddisplay connector.
[* black] TheUnlock the ZIF connector is attatched by using a very sticky sticker onspudger to flip up the back (the one with the qr codeblack tab on it), however once that sticker comes uptop of the connector pops off andconnector.
[* black] Pull
the screen is freeribbon cable out with tweezers.
[* black] ConnectRemove the new screen to the connector. I would test the screen to see if it works before I put it back together, but if you trust that it'll work, continue to reassemblescreen.