Cambios al paso #1
Editado por Jeff Suovanen —
Edicion aprobada por Jeff Suovanen
- Antes
- Después
- Sin cambios
Líneas de Paso
| [title] Removing the guts | |
| - | [* black] Requires a small 6 pointed star bit to pull screws...i found mine in a chinese store in Spain (or tiny flathead). Remove all four screws. Then "pop" out the electronics by pressing in the reset hole and pushing out the side with a pin. Use your thumb and push it up towards the wrist band clip (top in this picture). The unit "slides" up and out. |
| - | [* black] New line. |
| + | [* black] Remove all four T3 Torx screws. Then "pop" out the electronics by pressing in the reset hole and pushing out the side with a pin. Use your thumb and push it up towards the wrist band clip (top in this picture). The unit "slides" up and out. |