Saltar al contenido principal

Cambios a Paso #1

Editado por Omar Cuevas

Edicion aprobada por Omar Cuevas

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Wedge aCarefully wedge the flathead 3/32" screwdriver inon the outer groove of the control panel faceplate.
[* black] Follow the perimeter of the groove with the flathead 3/32" screwdriver making sure
to removegently pry and lift upward until the control panel faceplate comes off.
[* icon_caution] Take your time prying off the control panel faceplate. If too much pressure is applied,
the control panel face platefaceplate can break.
[* black] Wedge aCarefully wedge the flathead 3/32" screwdriver inon the outer groove of the control panel faceplate.
[* black] Follow the perimeter of the groove with the flathead 3/32" screwdriver making sure
to removegently pry and lift upward until the control panel faceplate comes off.
[* icon_caution] Take your time prying off the control panel faceplate. If too much pressure is applied,
the control panel face platefaceplate can break.