Saltar al contenido principal

Cambios al paso #10

Editado por Jonathan Harger

Edicion aprobada por Jonathan Harger

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Remove the 3.0 mm screw on the top right of the button memory board using a Phillips #00 screwdriver.
-[* orange] Remove the 2.8 mm screw on the bottom left of the button memory board using a Phillips #00 screwdriver.
+[* red] Remove the 3.0 mm screw on the top of the button memory board using a Phillips #00 screwdriver.
+[* orange] Remove the 2.8 mm screw on the bottom of the button memory board using a Phillips #00 screwdriver.