Saltar al contenido principal

Cambios al paso #5

Editado por Jonathan Harger

Edicion aprobada por Jonathan Harger

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Open the port cover and remove the 3.3 mm screw underneath the cover using a Phillips #00 screwdriver.
+[* red] Open the port cover by lifting up the tab with your finger and remove the 3.3 mm screw underneath the cover using a Phillips #00 screwdriver.
[* orange] Remove the other 3.3 mm screw below the ports using a Phillips #00 screwdriver.