Saltar al contenido principal

Cambios al paso #2

Editado por iRobot

Aprobación pendiente

Sin cambios

Líneas de Paso

+[* black] Remove the following eight screws:
+ [* red] One 4.5 mm Phillips near the modem.
+ [* orange] Three 6 mm Phillips near the display.
+ [* yellow] Two large 7.5 mm Phillips with attached springs.
+ [* green] Two 13 mm Phillips, one on the lower left side of the heat sink and one between the fan and the optical drive.

Imagen 1

Ninguna imagen anterior