Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por msarolker

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Disconnect the hard drive cable from the hard drive by applying even pressure on both sides while maintaining a firm grip on the drive itself.
[* icon_note] This is a bit tricky. Try holding the drive against your body while pushing the cable away from you, or rocking the cable gently from side to side while applying even pressure, or both. If you bend the pins, do your best to straighten them, using the hard drive cable as a guide. Note that the black block you see attached to the orange strip, as held between the fingers in the picture, also comes away. AVOID separating the strip from this block!
[* icon_note] This is a bit tricky. Try holding the drive against your body while pushing the cable away from you, or rocking the cable gently from side to side while applying even pressure, or both. If you bend the pins, do your best to straighten them, using the hard drive cable as a guide. Note that the black block you see attached to the orange strip, as held between the fingers in the picture, also comes away. AVOID separating the strip from this block!
[* icon_note] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running.