Saltar al contenido principal

Changes to Step #9

Editado por Andrew Bookholt

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* black] LiftUse your left hand to move the left speaker out of its housing and set itMagSafe board cables enough to uncover the screw at the top of the left I/O frame.
[* red] Remove
the side 7.5 mm Phillips screw.
[* black] LiftUse your left hand to move the left speaker out of its housing and set itMagSafe board cables enough to uncover the screw at the top of the left I/O frame.
[* red] Remove
the side 7.5 mm Phillips screw.

Imagen 1

Versión antigua

Nueva versión