Skip to main content

Changes to Step #3

Editado por Andrew Bookholt

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* black] Remove the following 6 screws:
[* red] One 3 mm Phillips on the right side of the fan.
[* orange] One 6 mm Phillips on the left side of the fan.
[* yellow] Four 9 mm Phillips securing the heat sink to the lower case.
[* black] On Santa Rosa/Penryn models, the heat sink has a slightly different bolt pattern. See second picture.

Imagen 1

No hay imagen previa

Añadida

Imagen 2

No hay imagen previa

Añadida