Skip to main content

Changes to Step #2

Editado por Tom Green

Edicion aprobada por Andrew Optimus Goldheart

Borrada
Añadida
Sin cambios

Step Lines

[* black] Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable.
[* black] Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable.
[* icon_note] On Santa Rosa/Penryn models, there is only one temperature sensor connector containing all four leads. See second picture.

Imagen 2

Versión antigua

Nueva versión