Saltar al contenido principal

Cambios al paso #8

Editado por mayer

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Hold the display with one hand while removing the screws from the left hinge mount.
[* black] Remove the following 3 screws from the left hinge mount:
[* red] One 67.2 mm smaller diameter Phillips from the right side.
[* orange] One 65.2 mm larger diameter Phillips from the middle.
[* red] One 67.2 mm smaller diameter Phillips from the right side.
[* orange] One 65.2 mm larger diameter Phillips from the middle.
[* yellow] One 10 mm Phillips from the left side.
[* black] Lift the left hinge mount with plastic piece out of the computer.
[* black] Check that the cables on the right are not trapped under other cables.
[* black] Lift the left hinge mount with plastic piece out of the computer.
[* black] Check that the cables on the right are not trapped under other cables.