Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #6

Editado por Brett Hartt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Disconnect the three antenna cables from the Airport card.
[* blackicon_note] Disconnect the inverter cable from the socket by inserting the spudger between the right or left edge of the plug and the socket, and prying gently upward. The inverter plug lifts vertically off of the circuit board. Do not pull it in the direction of the connecting wires or you will tear the socket off.
[* blackicon_note] Disconnect the inverter cable from the socket by inserting the spudger between the right or left edge of the plug and the socket, and prying gently upward. The inverter plug lifts vertically off of the circuit board. Do not pull it in the direction of the connecting wires or you will tear the socket off.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn, there are only two antenna cables and the black inverter cable is in a different location.