Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #6

Editado por Dan

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Disconnect the three antenna cables from the Airport card, andcard.
[* black] Disconnect
the black inverter cable from the logic board.
[* icon_note]
socket by inserting the spudger between the right or left edge of the plug and the socket, and prying gently upward. The inverter cable connector may be covered by a small pieceplug lifts vertically off of foam tape. Remove this cube before disconnecting the connectorcircuit board. Do not pull it in the direction of the connecting wires or you will tear the socket off.
[* black] Disconnect the three antenna cables from the Airport card, andcard.
[* black] Disconnect
the black inverter cable from the logic board.
[* icon_note]
socket by inserting the spudger between the right or left edge of the plug and the socket, and prying gently upward. The inverter cable connector may be covered by a small pieceplug lifts vertically off of foam tape. Remove this cube before disconnecting the connectorcircuit board. Do not pull it in the direction of the connecting wires or you will tear the socket off.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn, there are only two antenna cables and the black inverter cable is in a different location.