Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #6

Editado por Dan

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Disconnect the three antenna cables from the Airport card, and the black inverter cable from the logic board.
[* icon_note] The inverter cable connector may be covered by a small piece of foam tape. Remove this cube before disconnecting the connector
card.
[* black] Disconnect the three antenna cables from the Airport card, and the black inverter cable from the logic board.
[* icon_note] The inverter cable connector may be covered by a small piece of foam tape. Remove this cube before disconnecting the connector
card.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn, there are only two antenna cables and the black inverter cable is in a different location.