Cambios al paso #5
Editado por Cory Jeanes —
Edicion aprobada por Cory Jeanes
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] With the top panel removed, locate the metal plate covering the zoom control on the underside of the panel (located on the forward left side, if the panel is oriented similarly to the |
|---|---|
| - | [* black] Remove the screws from the plate, and lift and fold the plate to the right (as shown in |
| + | [* black] With the top panel removed, locate the metal plate covering the zoom control on the underside of the panel (located on the forward left side, if the panel is oriented similarly to the first image.) This plate will also be connected to some circuit ribbon. Leave the ribbon attached to the plate. |
| + | [* black] Remove the screws from the plate, and lift and fold the plate along the attached circuit ribbon to the right (as shown in second image.) |