Saltar al contenido principal

Changes to Step #2

Editado por Becca Chance

Edicion aprobada por Becca Chance

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Unscrew the torxTorx #8 screws holding the hard drive case in its place on the logic board.
[* black] Lift up on the hard drive andto disconnect its ribbon cable from the logic board, just like in the previous steps.
[* red] Unscrew the torxTorx #8 screws holding the hard drive case in its place on the logic board.
[* black] Lift up on the hard drive andto disconnect its ribbon cable from the logic board, just like in the previous steps.