Saltar al contenido principal

Changes to Step #2

Editado por Christopher

Edicion aprobada por Christopher

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Unscrew the torx #8 screws holding the hard drive case in placeits place on the logic board.
[* black] Lift up on the hard drive out, and disconnect theits ribbon cable connecting the hard drive tofrom the logic board by pullingboard, just like in the cable up and out of its connectorprevious steps.
[* red] Unscrew the torx #8 screws holding the hard drive case in placeits place on the logic board.
[* black] Lift up on the hard drive out, and disconnect theits ribbon cable connecting the hard drive tofrom the logic board by pullingboard, just like in the cable up and out of its connectorprevious steps.