Saltar al contenido principal

Changes to Step #2

Editado por xgonin

Edicion aprobada por David Hodson

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Unscrewred] Unscrew the torx #8 screws holding the hard drive case in place.
[* black]
Lift the hard drive out, and disconnect the ribbon cable connecting the hard drive to the logic board by pulling the cable up and out of its connector.
[* black] Unscrewred] Unscrew the torx #8 screws holding the hard drive case in place.
[* black]
Lift the hard drive out, and disconnect the ribbon cable connecting the hard drive to the logic board by pulling the cable up and out of its connector.