Saltar al contenido principal

Changes to Step #2

Editado por Alex Wineteer

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* black] Unscrew the torx #8 screws holding the hard drive case in place. Lift the hard drive out, and disconnect the ribbon cable connecting the hard drive to the logic boardboard by pulling the cable up and out of its connector.
[* black] Unscrew the torx #8 screws holding the hard drive case in place. Lift the hard drive out, and disconnect the ribbon cable connecting the hard drive to the logic boardboard by pulling the cable up and out of its connector.