Cambios al paso #3
Editado por Paige Kloetzer —
Edicion aprobada por Paige Kloetzer
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Use a blue pry tool and separate the black back plate from the camera. | |
| [* black] Once the black plate is separated, carefully pull apart the back plate from the front half of the camera. | |
| + | [* icon_caution] Make sure all four sides of the back casing are pried from the camera before completely pulling it apart. If not pulled off evenly plastic placement tabs may break. |