Saltar al contenido principal

Changes to Step #3

Editado por Moritz

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* black] Remove the following 3 screws:
[* red] TwoThree 7.5 mm Phillips #0 from either end of the left I/O frame.
[* orange] One 9 mm Phillips from the middle of the left I/O frame.
[* black] Remove the small black plastic spacer at the bottom
of the left I/O frame.
[* red] TwoThree 7.5 mm Phillips #0 from either end of the left I/O frame.
[* orange] One 9 mm Phillips from the middle of the left I/O frame.
[* black] Remove the small black plastic spacer at the bottom
of the left I/O frame.

Imagen 1

Versión antigua

Nueva versión