Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Ray Lewis

Edicion aprobada por Adam O'Camb

Antes
Después
Sin cambios

Líneas de Paso

[* black] Gently pull outRemove the wire stripsponge (save for later replacement) and gently flip the black tab 90 degrees to release the connectors grip on the ribbon cable. Remove the ribbon cable from the circuit boardconnector. note: The black tab must be in this position in order to reinsert the ribbon cable on reassembly.
[* black] Gently pull outRemove the wire stripsponge (save for later replacement) and gently flip the black tab 90 degrees to release the connectors grip on the ribbon cable. Remove the ribbon cable from the circuit boardconnector. note: The black tab must be in this position in order to reinsert the ribbon cable on reassembly.