Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Adam O'Camb

Edicion aprobada por Adam O'Camb

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the sponge (save for later replacement) and gently flip the black tab 90 degrees to release the connectors grip on the ribbon cable. Remove the ribbon cable from the connector. note: The
[* icon_reminder] The
black tab must be in this positionflipped up in order to reinsert the ribbon cable on reassembly.
[* black] Remove the sponge (save for later replacement) and gently flip the black tab 90 degrees to release the connectors grip on the ribbon cable. Remove the ribbon cable from the connector. note: The
[* icon_reminder] The
black tab must be in this positionflipped up in order to reinsert the ribbon cable on reassembly.