Cambios al paso #1
Editado por Blake Ehlers —
Edicion aprobada por Blake Ehlers
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Locate the four 8.1mm |
|---|---|
| + | [* red] Locate the four 8.1mm PH00 screws on the corners of the GoPro and unscrew them using the phillips screwdriver. |
| [* black] Gently remove the motherboard by using a plastic opening tool to pry it out of the housing. | |
| [* icon_caution] Be careful not to damage the ribbon cable connected to the GoPro housing and motherboard. |