Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Taylor Cuzino

Edicion aprobada por Taylor Cuzino

Antes
Después
Sin cambios

Líneas de Paso

[* black] Unscrew the visible Philips head 5/32 screws on the logic board located on the top of left and right sides. Use a 0 sized screw driver head for removal. Notice these screws are slightly larger than the ones on the outside of the device. Make sure not to mix them up with the outer screws.
[* black] Unscrew the visible Philips head 5/32 screws on the logic board located on the top of left and right sides. Use a 0 sized screw driver head for removal. Notice these screws are slightly larger than the ones on the outside of the device. Make sure not to mix them up with the outer screws.