Saltar al contenido principal

Cambios al paso #3

Editado por Lisa Langley

Edicion aprobada por Lisa Langley

Sin cambios

Líneas de Paso

-[* red] First, lift up on the bumper/trigger sensor to simply clear up a little bit of working room. It is indicated by the red arrow. Next, unscrew the indicated black screw which uses a J0 bit. This screw is 4 mm long.
+[* red] For more space, remove the right trigger button and push the trigger sensor, indicated by the red arrow, up. Then, indicated by the red circle, remove the 4 mm screw with the J0 screwdriver.