Saltar al contenido principal

Cambios al paso #3

Editado por Will Grabb

Edicion aprobada por Will Grabb

Antes
Después
Sin cambios

Líneas de Paso

-[* black] First, lift up on the bumper/trigger sensor to simply clear up a little bit of working room. It is indicated by the red arrow. Next, unscrew the indicated black screw which uses a J0 bit.
+[* red] First, lift up on the bumper/trigger sensor to simply clear up a little bit of working room. It is indicated by the red arrow. Next, unscrew the indicated black screw which uses a J0 bit. This screw is 4 mm long.