Saltar al contenido principal

Cambios a Paso #6

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Peel up the foil tape between the fan and the optical drive. Lift the foil tape from the fan side, leaving it attached to the optical drive.
[* black] Tip: When you later put the tape back on, do it only afterDuring reassembly, be sure to route the cables are plugged back in. - AJMbeneath the tape before reattaching it.
[* black] Tip: When you later put the tape back on, do it only afterDuring reassembly, be sure to route the cables are plugged back in. - AJMbeneath the tape before reattaching it.