Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #7

Editado por Andy

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_caution] There's a trackpad and keyboard ribbon connecting the upper case to the logic board, so don't pull the upper case off entirely just yet.
[* black] Starting near the display and working around to the front of the computer, pry up on the upper case.
[* icon_note] The upper case is likely to stick at the connection above the optical drive. If this is the case first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening.
[* black] When doing reverse step .. ensure the clips above the optical drive are on the base section. if on the underside of the keyboard use spudger to remove then and attach back on base. they will slide in easily otherwise they will break if you try to force them in..