Cambios al paso #1
Editado por iRobot —
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Remove the following 3 screws: |
| [* red] One 11 mm Phillips in the middle of the case. |
| [* orange] Two 14.5 mm Phillips. |
| [* icon_note] If the screws stick in the case, you can use a magnetized screwdriver to draw them out. |
| [* icon_reminder] The shorter of the three screws goes in the middle. |
Imagen 1
Ninguna imagen anterior
Añadido