Cambios a este Paso
Editado por Austin Stratton —
Edicion aprobada por Austin Stratton
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Using something thin such as the metal spudger, wedge it between the screen and body of the phone to create a gap. Place the plastic opening tool in this gap and gently pry up to start lifting out the screen. |
|---|---|
| + | [* black] Continue to do this around all edges of the phone until the screen can be removed. |
| + | [* icon_note] Remove the old adhesive from the phone and replace with new adhesive so it stays in place. |
| + | [* icon_reminder] Before replacing the display, make sure there is a metal grill in the speaker hole on the new display. If not, use the one from the old display. |