Saltar al contenido principal

Cambios al paso #3

Editado por Naman Johri

Edicion aprobada por Naman Johri

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Located the antenna, on the right hand corner. Once located, using a Phillips #00 Screwdriver unscrew the screws.
+[* black] Located the antenna, on the right hand corner. Once located, using a Phillips #00 Screwdriver unscrew the 6.8 mm screw located on the motherboard.
[* icon_caution] When separating the motherboard from the front cover, be careful not to separate the two red wires which connect the speaker to the motherboard.
[* black] Once you've safely detached the two units, now relocate the Antenna. Flip the device and locate the solder points.
[* black] Using a Soldering Iron, detach the Antenna and solder a new antenna.

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Versión Antigua

Nueva Versión