Saltar al contenido principal

Changes to Step #5

Editado por Brett Hartt

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* red] These are the magnets on the left side of the iPad 2 -- the ones that attract the Smart Cover's frame. They're integrated into the iPad 2's back cover, and held in place with four #00 Phillips screws.
[* black] These magnets take the same rounded contour as the exterior of the iPad 2's aluminum case. This allows for the best possible connection between the magnets in the iPad 2 and those in the Smart Cover's frame.
[* yellow] Interestingly, these magnets' polarities were manually marked -- a blue dash written with a marker -- instead of having a machine stamp/engrave the polarity into them.
[* icon_note] About 10 seconds after we took the second picture, the magnets naturally gravitated towards one another and fused together -- they are very strong!