Saltar al contenido principal

Cambios al paso #1

Editado por Ron Davis

Edicion aprobada por Ron Davis

Antes
Después
Sin cambios

Líneas de Paso

[* black] Starting with the right speaker, use a screwdriver and PH000 phillips head to remove the 10mm10 mm Phillips #000 screw.
[* black] Starting with the right speaker, use a screwdriver and PH000 phillips head to remove the 10mm10 mm Phillips #000 screw.
[* black] Use the spudger to begin pulling out the speaker.
[* black] Wedge the spudger underneathbeneath the amplifier to remove it from the adhesive holding it down.
[* black] Wedge the spudger underneathbeneath the amplifier to remove it from the adhesive holding it down.